China OEM Flange Industrial Exporter – Threaded Flanges – DS PIPE
China OEM Flange Industrial Exporter – Threaded Flanges – DS PIPE Detail:
Description
Threaded flanges, also sometimes referred to as companion flanges / screw flanges / NPT flanges, contain a female NPT thread in the center for connection to male NPT threaded piping. Threaded flanges are common when creating reducing connections. Other thread styles are available for machining, aside from the standard NPT form as designated by the ASME B16.5 specification.
Even though the threaded flange design is available in many sizes and pressure ratings, it is mainly used for small sized piping systems i.e. ≤ 4 inches. Its usage is also typically restricted to non-toxic systems, low pressure systems, and low temperature systems. ½ inch to 2-inch size threaded flanges are much more common than sizes of 2 inches and above. Due to their lower pressure applications, threaded flanges use flat and raised faces only. They are not suitable for high temperature applications because the thread geometry would distort, which often leads to leakage.
The major advantage with threaded flanges is that they can be connected to a pipe without the need for welding. Forming joints without needing to weld is a considerable advantage, and is essential in some locations and industries e.g. explosive areas (Ex rated areas) such as petrol stations, hexagon plants, stores with flammable fluids etc. If no welding is required, a potential source of ignition is removed. Another advantage is that it is quicker and easier to assemble and disassemble a threaded flange joint than a welded flange joint.
Threaded flanges are not suitable for pipes that have a thin wall thickness, since cutting a thread on such pipes is difficult. In some cases, a seal weld may be used to increase the flange’s integrity and reduce the likelihood of leakage. Adding a seal weld will increase the flange’s integrity, but it also makes the joint more difficult to assemble and disassemble (because the weld makes it a permanent joint).
China leading Threaded flanges manufacturer ((www.dingshengflange.com))
one-stop OEM and manufacturing for Threaded flanges in Stainless Steel.
Product detail pictures:
Related Product Guide:
Persisting in "High good quality, Prompt Delivery, Aggressive Price", we've established long-term cooperation with shoppers from each overseas and domestically and get new and previous clients' high comments for China OEM Flange Industrial Exporter – Threaded Flanges – DS PIPE , The product will supply to all over the world, such as: Bangkok, USA, Czech Republic, Aiming to grow to be by far the most experienced supplier within this sector in Uganda, we keep researching on the creating procedure and raising the high quality of our principal merchandise. Till now, the merchandise list has been updated on a regular basis and attracted customers from around the globe. In depth data can be obtained in our web page and you'll be served with good quality consultant service by our after-sale team. They're about to make it possible for you to get complete acknowledge about our things and make a satisfied negotiation. Small business check out to our factory in Uganda can also be welcome at any time. Hope to obtain your inquiries to get a happy co-operation.
By Priscilla from Brazil - 2018.06.03 10:17
We are old friends, the company's product quality has been always very good and this time the price is also very cheap.
By Bernice from Bogota - 2017.11.01 17:04
